It becomes very important to ask a few questions whenever hiring an electrician for any electrical work after all it’s a matter of safety to find the right electrician or electrical contractor. Electrical problems such high electricity bill, circuit overload, tripping, lights flickering, electrical shocks and fires etc. can happen anytime.
Ask the following questions to avoid inferior electrical work:
For fixing the electrical problems or issues, we hire an electrician and its good. But before going further, do ask them some questions first so that you can get a genuine and licensed electrician with the right experienced for electrical works.
Are you a licensed electrician?
In true sense, a licensed electrician has the right to work in their field while certified one recognizes their experience levels. After knowing them, you will easily understand what is right because there are many electricians who call themselves a licensed electrician but they are not actually. So, always ask as much as possible questions to get the job done in the right way.
Are you covered by insurance?
The works your hired electrician will do could damages your residential, commercial and industrial properties e.g. houses, buildings, apartments, plants or factories etc. if things go wrong. If the hired electrician and electrical contractors are not insured, it can cost you too much.
An insured electrician always take care of these things and are ready to offer quality electrical services with the updated documentation (license, a legal agreement and covered insurance). Ask this question whenever planning to hire an electrician or electrical contractors for electrical works.
Do you offer a warranty?
Always ask for the warranty and look for whether the electrical parts or its services are under the warranty and how long it is effective. Only certified and licensed electrician can offer such a warranty.
Who will do the electrical work?
Ask electrician frequently, who will do the electrical work? After getting the answer to this question you will be able to decide who is going to do the job if he gets hired. It could be the owner, employee or sub-contractor but everything has its own limitations and preferences.
How many years of experience do you have as an electrician?
Experience is as important as having a license because it may be that you are very educated, but without any experience, they are all useless and not of any use. What happens actually? An electrician who has done proper education in the electrical field know the code but he has no idea and doesn’t know completely how to implement them whenever it needs due to the lack of experience. Never forget to ask this question to the electrician or electrical contractors before their hiring.
Only an experienced and certified electrician can understand the importance of quality electrical services and keep the customer away from unexpected electrical expenses and its repairs.
Image by Jill Wellington from Pixabay as seen at https://pixabay.com/photos/let-it-snow-winter-christmas-design-1918800/
Winter is the coldest season of the year as well know this where days become shorter and nights become longer. Winter days also consider a holiday and festive season where people use to celebrate Christmas and New Year eve party and also do some bit amount of lighting decoration in their houses or public places that can lead to the electrical problems or issues.
Winter days also consider a holiday and festive season where people use to celebrate Christmas and New Year eve party and also do some bit amount of lighting decoration in their houses or public places. During winter days, most people use electrical heating systems e.g. electric heater, geyser, appliances and clothes so that the body can get enough heat, in our site. But it can harm and lead to serious electrical problems.
Let’s talk about some more electrical problems and its solutions to learn what precaution we should take in winter days for getting safe and secure electricity at residential, commercial and industrial places:
Electrical Circuit Or Outlet
In the winter season, the electrical circuit can be overloaded frequently, for which you will have to repair it, which will be chargeable. In winter, people use it more because of the cold. As a result, electrical outlet becomes overload and the chances of fire increase.
Circuit overload is not good especially for a house where a family lives together and forever. An overloaded circuit can get fire anytime and that’s not good. Nobody wants this to happen even when there is a celebration all around and people are enjoying the winter, a holiday season.
We should pay attention to the electrical circuit so that there is no electrical problem. If this happens, contact the electrician near to you immediately.
Electrical Wires
Electric wires are made up of metals and plastics which get damaged due to low temperature in cold winter. Metals become hard but liable to break easily and for electric wires, it could be an electric problem because hard electric wires remain unchanged and unable to bend excessively.
Plastic behaves in the same way as metals do in the cold temperature especially in the winter season.
Make sure that electric wires are made from the best quality metals and plastics that can withstand cold temperature in winter when buying or repairing the electrical wires. Otherwise, it can be dangerous, for which you may have to bear heavy losses.
Not sure and no idea about this, take help from certified and licensed electrician near to you.
Electrical Heating
Electrical heating, a process where electrical energy gets converted into heat energy and we use this electrical product as an electric heater, an electrical heating device that converts an electric current into heat.
We use electric heaters for space heating at one place in our houses or else for heating water, cooking etc. in winter.
Tips:
Don’t forget to unplug the space heater when it is not in use even at night and when you leave the space.
Connect space heaters directly into a wall outlet; avoid using extension cords or boards etc.
Make sure electric space, liquid and the industrial heater have an automatic shut off feature if they fall over.
Replace the electric heater if you think it’s gone bad.
Electric heaters can get the electric fire on a large scale because these are rarely energy efficient. Henced it must be properly equipped for the winter season.
Power Outage
On cold days people often use electric appliances to keep their homes and themselves warm, which consumes a lot of electricity Which causes a sudden power cut.
In the winter season, the power outage may impact particular houses, buildings, society and economy too. Nobody wants this to happen but it happens if we do not pay attention to the power outage.
Tips:
Freezer and refrigerator need to be closed most of the time whenever possible it is in cold weather.
Keep power generators outdoors and away from windows and living places of a particular house or building.
Unplugged electrical appliances, heaters and electronic devices to avoid electrical surges.
In winter days, check the electrical breakers and the power lines of a house. If it’s gone bad, stay away and contact 24-hour emergency electrician near to your immediately.
Follow the above basic tips to get protected from the sudden power cut or outage in winter due to cold weather and low temperature that changes frequently.
Flickering (Blinking) Lights
You must have noticed flickering lights in winter, a cold-weather season when you turn on electric lights, it takes time to light up well. Flickering happens when the electric current goes up and down. Or else it is caused by loose wire and holder.
So, the electrical lighting and its wire connection should be in the recommended way so that there is no electrical problem otherwise it can get the electrical fire, short circuit or something else. What we need to do is, nothing, just pay attention and when found flickering of lights or bulb, contact the nearest electrician in your area and tell them about this electrical problem and take help.
Outdoor Lighting
For electrical problem whether it’s a industrial, commercial or residential electrical problems or issues in Atlanta during the winter days, Get in touch with Ozburn Electrical Contractors and its Electricians for electrical services e.g. electrical installation, repair, inspection and maintenance services in Atlanta, Georgia (GA) the United States and its nearby surroundings.
Christmas lighting, parties, food and celebration can often overwhelm to ignore the common electrical safety and its precautions. But really it’s important to follow the safety electrical precaution first when decorating outdoor Christmas light.
When Christmas is about to begin in the month of December, we started to decorate our houses, commercial places and industrial buildings.
It’s good and pretty awesome, Christmas is the annual festive season that comes once in a year and we all love to celebrate it.
But we often forget to take basic precaution during Christmas lighting. So, let’s discuss and know the safest ways for Christmas light installation.
Outdoor Christmas Lighting Installation
When Christmas arrives, every one of us tries to decorate trees, rooftops, doors, windows and entrance gates etc. with wire using the electrical outlet. So, what we need to do here?
Make sure that whether all the wires connected to a GFCI (Ground Fault Circuit Interrupter) electrical outlet or required GFCI electrical outlets.
If all the electrical wires are connected to a single electrical outlet, it would be overloaded and dangerous too.
So, always pay a bit of attention to the outdoor Christmas lighting for the house when doing Christmas decoration.
Once it has gone, take down the Christmas light safely, harsh weather temperature can damage or even it gets an electrical fire.
Christmas Light Installation and Precautions
For Christmas light installation, it’s really important to pay a bit attention when preparing for Christmas lighting for house.
Few basic precautions we can follow for outdoor Christmas light:
Inspect The Wires
Never forget to inspect the electrical wires before the installation of Christmas lights at your houses or commercial buildings. Check the wires whether it is suitable for outdoor lighting or not, is it of good quality? If everything looks good then go ahead.
GFCI Electrical Outlet
GFCI electrical outlets, especially for outdoor Christmas lighting for houses, a good idea and one of the safest way to get rid of electrical fires.
GFCI outlets designed for ground-based wiring that reduces the chances of damaging electrical wires. So, we must use GFCI electrical outlets for outdoor Christmas light.
Waterproof Lights
We can only predict nature behaviour and its weather condition. We can’t rely on this for hundred percent as we all know that. No one is superior to nature actions and its changing weather conditions. So. it could be rain too, so must use waterproof lights for Christmas lighting and get relaxed.
Electrical Tools
Always carry electrical tools e.g. pliers, wire strippers, circuit tester, insulated screwdrivers, tap and ladder etc. With these electrical tools, there would be less chance of electrical damage or something else.
Take help for the professional electrician for outdoor Christmas lighting installation if not sure how to do this properly.
Get in touch with Ozburn Electrical Contractors and its Electricians in Covington, GA for truly cost-effective Christmas lighting services in Georgia, the United States.
Natural disasters e.g. earthquakes, floods, landslides, hurricanes, and storms. when taking place near our surroundings, one must take care when using electrical machines, wires, appliances, switches, lights or even a backup emergency power generator.
The emergency power generator is the frequent activity performed by most people during a sudden power cut to get back the lights on, therefore, it is necessary to obey the following basic safety rules and precautions of electricity:
Don’t Operate Power Back Up Generator
Storms, hurricanes, and floods are dangerous when it gets in touch with electrical machines and products such as lights or power backup generators, etc. It can harm and leads to electrical damage if we don’t follow the basic safety rules and precautions when trying to operate the power generator. So, we must be active and aware when there is a natural disaster.
Safety Precautions When Operating Power Generator
Before operating an emergency power generator during natural disasters, try to make sure that your amperage is higher than the required amperage. You can check it online at watts / volts / amps / ohms calculator and read the instructions for not overloading the power generator. Also, make sure and check electrical products are connected directly to the generator rather than indirectly connected to the generator using extension cords and wire, etc.
Install CO (Carbon Monoxide) detectors in your places whether it’s residential, commercial, or industrial buildings for safe living. Keep backup power generator fuel outside of living places in a recommended container and check the generator whether it is cool or not before refueling to avoid sudden fire.
Never place the emergency power generator in a closed space. It must be installed fifteen feet away from the windows and doors of a building and never ever try to operate the power generator without transfer switches because it can produce an electrical shock that could be dangerous and deadly too. It is also recommended to go through the manufacturer has written suggestions and safety rules for using an emergency backup power generator.
Contact Certified Emergency Power Generator Service Provider for Safe and Secure Living
If, not sure and confused about the electrical safety rules and its precautions, try to contact a certified and licensed electrician nearest to your place. A professional electrician knows how to get out of emergency power generator installation and repair problems for home when natural disasters take place.
Ozburn Electrical Contractors Inc. Covington, Georgia (Ga)
There are so many electrical problems that needs to be fixed first for a safe and secure living. Some are minor and some are major electrical issues.
For minor electrical problem, you can fix it by yourself but for major electrical faults, it is always preferred to take help from a certified electrician in your area that provides electrical repairing services. So, let’s talk about the most common electrical problems and issues to fix it asap:
Loose Electrical Outlet Plug
It is one of the most common electrical problem we found in houses. It seems minor initially but it could be so dangerous as it lead to a electrical fire or short circuit one day in future and can harm your house badly. So, it’s very important to pay attention to get rid off such problems and issues whenever you saw.
Broken Electrical Switch
Another, the most common common electrical problem to get it fixed as soon as possible. Broken electrical switches are dangerous as it can give the unexpected electrical shocks if someone gets in touch with the damaged switch by mistake, so for safe and healthy life, we must pay attention to get it fixed asap with the help of licensed and certified electricians nearest to your location, place, region or area.
Electrical Short Circuit
There could be so may factors in a house for electrical short circuit such as high voltage, overloaded wires, electrical appliances, electronic products (TV, Refrigerator, Laptops, Mobiles etc), damaged wires and much more. We must fixed sort out electrical short circuit problem for safe and secure life at home by paying attention on it. If you think, it not under your control and don’t know how to get it fixed, contact a licensed residential electrician as they will fix problems and issues related to electrical short circuit.
Damaged Electrical Extension Cord
Sometimes, your home appliances and electronics products extension code gets damaged and it becomes risky and serious problem for the house owner as it can leads to a unwanted electrical shocks someday when someone will touch the broken electrical extension cord by mistake. So, never ever try to ignore this minor issues and try to get it fixed as soon as possible, even a person can fix it and for doinf this, he doesn’t need to be a electrician at all.
Dimming Lights
Dimming lights is yet another the most common electrical problems and issues we faces in residential houses, industrial and commercial buildings, apartments or places. It happens when there is poor electrical connection that can lead to an electric arc, spark, fire and overheating. So, for safe, secure and solid lighting, there are some tips that can reduce dimming lights problems e.g. electrical wire, connection, current and its voltage that needs to pay attention when doing electrical work. Take help from certified electrical contractors or electricians to fix dimming lights problems and issues as they have better understanding, expertise and knowledge of electrical system and its process.
Dealing with the most common electrical problems is not like playing a game as it can harm you badly. Without the proper electrical tools, experiences and necessary knowledge, it’s impossible to deal with the common electrical problems and issues. So, don’t ignore the potential electrical dangers and contact licensed electricians and certified electrical contractors near by your location.
Before hiring an electrician and electrical contractors in Georgia, GA there are few important things that needs to figure out first for getting the cost-effective and best electrical services in Georgia.
Let’s say, you are in Atlanta, the capital city of Georgia (An U.S. State) looking to hire an electrician in Atlanta, GA but not enough idea to go ahead for it. There are few important things that need your attention to hire electrical services, electricians or electrical contractors in Atlanta,GA at the most cost-effective rates and prices for your industrial, residential and commercial electrical services in Georgia. Let’s talk about them one by one:
Licensed Electricians/Electrical Contractors
There are so many people in this world now can fix small electrical problems or issues with no doubts but to hire a licensed electrician is considered as safe and secure electrical services because there are some important reasons to hire licensed electrical contractors in Atlanta, Georgia, GA. So, what are the most important reason behind it? here they are:
Licensed electricians have proper training, knowledge and enough skills to fix electrical work easily as they are licensed electricians.
Licensed electricians can get an electrical work permit on your behalf because in Georgia, for some electrical work you need to apply for a work permit from the city otherwise you will be fined that is not good at all.
Licensed electricians quite knows and understands about all the necessary safety and building codes when performing electrical work, so here you can be sure. In future, you don’t need to rework because each and every electrical work done by using codes that is interesting.
Licensed electricians gives first priority in terms of electrical safety and its records because when they start working, they always try to find out hazards that can harm the building and its occupier, means entire safety problems will be identified and addressed when the entire electrical work is done.
Electrical Expertise and Experience
It matters a lot. Without needed expertise and experience in electric and its entire electrical system, how an electrician or electrical service provider can provide satisfied electrical services? To always go with the experienced electrical contractors or electricians are considered a good idea always.
Electrician Reviews and Ratings
Nowadays, people look for the reviews and ratings posted by real people or customer from various resources such as Google, Facebook, Yelp etc. before purchasing anything online. So, here we need to do the same thing before hiring electricians and electrical contractors in Atlanta, GA, Georgia, United States.
Mickey Anderson graduates from PEP (Professional Electrician’s Program).
After a minimum of 576 hours of classroom instruction, completed homework, quizzes, labs and testing with passing grades, another Ozburn Electrical employee has graduated from the highly-accredited and prestigious (IEC) Independent Electrical Contractor’ “Professional Electrician’s Program” (PEP). The formal graduation event was held July 12, 2019 at the Horizon Event Center in Norcross, GA with 68 graduates from around the state of Georgia in attendance.
Terry Ozburn, owner of Ozburn Electrical Contractors (OEC), was proud of young Mickey Anderson for his graduation and said that “Ozburn Electric instills in it’s employees the importance of continuing education and we are once again proud of another employee that has taken advantage of accessing this wonderful educational opportunity through our OEC scholarship program.”
Through Ozburn Electric’s scholarship program, an employee has the opportunity to further their education, free of charge, as long as they carry passing grades. Along with the 2 years of classroom instruction, the “PEP” or “Professional Electrician’s Program” is an accelerated program for professional electricians who have already surpassed the knowledge of an apprenticeship program. IEC also offers many other educational opportunities including a 4 year school of instruction, the Office of Apprenticeship, that has a required minimum of 8,000 hours of on-the-job training for each graduate.
Terry Ozburn went on to state that “The Independent Electrical Contractors’ school is regulated by the National Labor Bureau out of Washington, D.C. This makes around 30 Ozburn Electric employees, since 1984, who have participated and graduated from an accredited program through the Independent Electrical Contractor’s education program.”
Ozburn Electric was instrumental in assuring that Mr. Anderson’s logged his hours, maintained passing grades, and most importantly, applied the concepts learned in the classroom to his field work. Ozburn Electric is part of a nationwide network of over 2,500 electrical contractors with the power to get work performed no matter where the job is located or what the job entails. IEC contractors are synonymous with quality work and skilled workers. When you are part of the IEC, your company represents the best the electrical industry has to offer and Ozburn Electric is very proud to have been a part of this wonderful organization since 1984. From work place safety to working on industrial relays and starters, Ozburn is proud to offer it’s customers the very best.
Mickey Anderson enjoys working for Ozburn Electric and specializes in motor controls, relays, PLCs (Programmable Logic Controllers) and more. He enjoys working in any situation including Residential, Commercial or Industrial but his favorite is in the Industrial sphere of electrical work.
Since 1984, Ozburn Electrical Contractors, Inc., located in Covington, GA, offers high-quality work in Residential, Commercial and Industrial electrical applications. Give them a call today at 770-784-1618 or 1-855-629-8797. Ozburn Electric services local clients along with the metro Atlanta area and the entire Southeastern United States.
